Cleaning; Cleaning The Interior - shark EvoLine 3 Série Mode D'emploi

Masquer les pouces Voir aussi pour EvoLine 3 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
22

CLEanInG

CLEanInG ThE InTErIor

The interior textile parts are washable;
it is important to strictly follow the ins-
tructions below to avoid damaging them:
The cheek pads and head section must
be hand washed in warm, soapy water
(about 30°). Do not use aggressive
detergents but either a product for
delicate materials in low dilution
or household soap.
It is essential to dry textile
and foam parts completely
before reinstalling them in
the helmet. They must be
air dried at room tempera-
ture. never use a clothes
dryer or other heat source.
never iron textile parts.
For parts with a leather
appearance or textiles
attached to safety ele-
ments, use a slightly damp
sponge or cloth and house-
hold soap and rinse with clean
water. Do not allow too much
water to come into contact with
polystyrene parts.
You must insure that all interior parts
are perfectly dry before using the helmet.
warnInG: Damaged interior padding
will compromise the fit of your helmet
on your head and could allow the helmet to
come off your head in an accident, resulting
in a head injury or death.
erManualEvoCarbon.indd 22
ThE TExTILE ParTs
The textile and foam parts providing
comfort to the EvoLine
for you to appreciate the performance
of your helmet to the full.
The parts in contact with the skin are
made in a fabric that is guaranteed to
feel pleasant, to absorb perspi-
ration well and to resist wear
satisfactorily.
we treat surfaces to limit the
risk of mould and bacteria.
their quality of resistance
and satisfactory wear, all
the comfort padding is
subject to normal wear
and tear. The rate of wear
and tear will depend on
use, care and maintenance,
the length of use and the
degree of acidity of your
perspiration. wear and tear of
the comfort padding will even-
tually change the fit of your helmet
on your head. If that occurs, you must
immediately replace the helmet or pad-
ding. see your retailer for advice.
warnInG: Each time you put on
your helmet, check the fit as dis-
cussed in "Choose your size" on page 4.
make it easy
®
warnInG: although
they are selected for
24/07/14 16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Evoline pro carbon

Table des Matières