shark EvoLine 3 Série Mode D'emploi page 19

rEmoVaL
We have designed your helmet to make this ope-
ration very easy:
- Move the visor to the high position (Fig. A);
- Apply pressure to the catches using a screwdri-
ver or similar pointed instrument;
- Pivot the visor (Fig. C); it will come out of its
support without any difficulty (Fig. D).
warnInG! If you are not sure that you
properly replaced the visor, do not use
the helmet. The visor could suddenly and wit-
hout warning become detached from the hel-
met while riding, causing you to lose control
of your motorcycle, resulting in an accident,
personal injury, or death. Contact your retailer
for any assistance or advice.
while riding at highway speeds, do not ride
with an open visor and do not try to open
the visor. The visor could become dislodged,
leaving your eyes and face unprotected. In
addition, your head could be pulled to the side.
These events could cause you to lose control
of your motorcycle, resulting in an accident,
personal injury or death.
warnInG! Tinted or dark visors should
never be used at night or under poor
visibility conditions as they reduce your ability
to see. never ride with a fogged visor.
warnInG! If your visor no longer pro-
vides you with clear visibility after
a period of service, you must immediately
replace it. never ride with your vision obscured
in any way. always ride with perfect visibility.
erManualEvoCarbon.indd 19
B
C
19
VIsor
a
D
24/07/14 16