The Sun Shield - shark EvoLine 3 Série Mode D'emploi

Masquer les pouces Voir aussi pour EvoLine 3 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26

ThE sun shIELD

The EvoLine
with external controls.
warnInG: This sun shield can be used only in bright
glare and when you are not riding in an area in which
you risk having a sudden change in visibility (a tun-
nel, for example). In all situations of reduced visibili-
ty, at the beginning or end of the day, at night, when it
is raining or foggy, etc. the sun shield must be kept in
the high position so that your vision is not impaired.
The sun shield is operated using the button in the
upper ventilation.
When the sun shield is lowered, the button is in a
forward position; to raise it, move the button toward
the back.
To ensure its protection and lengthen its lifespan, the
external surface of the EvoLine
given an anti-scratch treatment. To maintain and clean
it, please follow the same instructions as for the exter-
nal surface of the visor.
warnInG: If your visor and/or sun shield no longer
provide you with excellent visibility after a period
of service, it is absolutely essential for you to
replace them. we advise you always to ride with
perfect visibility. never use sunshield as unique
protection, without the main visor. You must
always ride with visor down as described in pre-
vious section.
a
erManualEvoCarbon.indd 21
is equipped with an Integral sun shield
®
sun shield has been
®
B
rEmoVaL
A/ Removal
- Move the sun shield to the lower position
- Apply pressure to the central fixing button using a
screwdriver or similar pointed instrument (Fig. A);
- Pull the sun shield delicately downward (Fig. B);
- Unclip the sun shield at the sides (Fig. C).
D
rEPLaCEmEnT
Carry out the above operation in reverse order:
- Move the handling button to the low position;
- Clip the sun shield on at one side and then the other
(Figs. C – D);
- Using a screwdriver or similar pointed instrument,
apply pressure to the central fixing button and then clip
the sun shield back on by lifting it slightly.
warnInG! If you are not sure that you properly
replaced the sun shield, do not use the helmet. The
sun shield could suddenly and without warning become
detached from the helmet while riding, causing you to
lose control of your motorcycle, resulting in an accident,
personal injury, or death. Contact your retailer for any
assistance or advice.
nEVEr ride with the sun shield as eye protection. You
must always ride with the visor in the lowered position, as
described in the previous section.
21
sun shIELD
C
C
24/07/14 16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Evoline pro carbon

Table des Matières