Struers Unitom-2 Manuel D'instructions page 3

Unitom-2
Instruction Manual
Unitom-2
Safety Precaution Sheet
To be read carefully
before use
1.
The operator(s) should be fully instructed in the use of the machine and
its cut-off wheels according to the Instruction Manual and the
instructions for the cut-off wheels.
2. The machine must be placed on a safe and stable support table. All
safety functions and guards of the machine must be in working order.
3. Use only intact cut-off wheels. The cut-off wheels must be approved for
min. 50 m/s.
4. Observe the current safety regulations for handling, mixing, filling,
emptying and disposal of the additive for cooling fluid.
5. The workpiece must be securely fixed in the quick-clamping device or
the like. Large or sharp workpieces must be handled in a safe way.
6. The cutting handle should be lowered slowly and carefully, in order to
avoid breaking the cut-off wheel. The cutting handle automatically
returns to its top position when you let go the handle.
7. Struers recommends the use of exhaustion as the materials to be cut
may emit harmful gasses or dust.
8. Use of working gloves is recommended as workpieces may be both
very hot and produce sharp edges.
9. Use of safety shoes is recommended when handling large or heavy
workpieces.
10. Use of safety goggles is recommended when using the flushing hose.
The equipment should only be used for its intended purpose and as detailed in the Instruction Manual.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).