Front Panel Controls - Struers Unitom-2 Manuel D'instructions

Front Panel Controls

Name Key

MAIN
SWITCH

Power
POWER


START


STOP
Unitom-2
Instruction Manual
Function
The main switch is located to the
right hand side of Unitom-2.
Turn clockwise to switch on the
power.
Lights when main power is
switched on.
Starts the machine. The cut-off
wheel starts rotating and the
cooling water is turned on.
Stops the machine. The cut-off
wheel stops rotating and the
cooling water is turned off.
 COOLING VALVE: See next page!
Name Key


FLUSH


OVERLOAD

EMERGENCY
STOP

Function
Lights when cooling valve is in
flushing position.
Lights when emergency stop
has been pressed or the cutting
motor is overloaded.
- Push the red button to stop.
- Pull the red button to release.
.
7