Charging A Stand-Alone Battery - Motorola Solutions PDX Série Mode D'emploi

Note: When charging a battery attached to the
radio, turn the radio OFF to ensure a full
charge. See "Operational Safety Guidelines"
on page 12 for more information.

Charging A Stand-Alone Battery

To charge only the battery - at step 4 on page 22,
insert the battery into the tray, with the inside surface
of the battery facing the front of the Drop-in Tray
Single Unit Charger as shown above. Align the slots in
the battery with the alignment ribs in the Drop-in Tray
Single Unit Charger.
Note: Ensure that the bracket in the charger is
adjusted to the correct position for either
Standard or High capacity battery. See
"Charging a Standard Battery" on the right.
23
English