Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMING
FEATURES
To easily program all the features in your radio, it is
recommended to use the Customer Programming
Software (CPS) and the programming cable.
CPS software download is available for free at
www.motorolasolutions.com/RDX.
ADVANCED CONFIGURATION MODE
Advanced Configuration is a configuration mode that
allows the customization of additional features via the
radio's front panel.
For non-display model radios, the navigation is guided
by an audible voice prompt.
When the radio is set to Advanced Configuration, you
are able to read and modify four features:
•
Frequency Selection,
•
Codes (CTCSS/DPL),
•
Auto-Scan,
•
Active Channels, and
•
Enable/Disable/Program the Weather Channel
The Frequencies Select feature allows you to
choose frequencies from a pre-defined list.
36
English
The Interference Eliminator Code (CTCSS/ DPL)
helps minimize interference by providing you with a
choice of code combinations that filter out static,
noise, and unwanted messages.
The Auto-Scan feature allows you to set a particular
channel to automatically enable Scan each time you
switch to that channel.
The Active Channels feature allows you to increase
or decrease the amount of active channels (In the
range of maximum channels allowed).
The Weather Programming feature allows you to
alternate the channel function between 2 way radio
channel and weather channel. There are seven
received frequencies available for this feature.
Entering Advanced Configuration Mode
Note:
Before configuring the features, make sure
your radio is set to the channel you wish to
program. You can do so before entering
Advanced Configuration Mode or at any
time during the Advanced Configuration
Mode by rotating the Channel Selector Knob
until you reach the desired channel.
To read or modify Frequencies, Codes, Auto- Scan,
Active Channels and Weather Channel set the radio
to 'Advanced Configuration Mode' by long pressing
Publicité
Chapitres
Table des Matières
Dépannage
