Active Channels; Weather Channel Programming (Not For Rdu4103); Saving Settings; Programming Mode Faq - Motorola Solutions PDX Série Mode D'emploi

ACTIVE CHANNELS

While in Auto-Scan mode, short pressing the PTT
button shifts the radio to 'Active Channels' feature.
Modify the amount of channels available using the
SB1 and SB2 buttons.
WEATHER CHANNEL PROGRAMMING
(NOT FOR RDU4103)
After setting the amount of Active Channels, short
pressing the PTT button moves you to Weather
Channel feature.
Use the SB1 and SB2 buttons to Enable/ Disable the
feature.

SAVING SETTINGS

Once you are satisfied with the settings, you can
either:
• short press the PTT button to continue
programming,
• long press the PTT button to save and return to
'Idle' Programming Mode, or
• long press the PTT button twice to exit 'Idle'.

PROGRAMMING MODE FAQ

38
English
I got distracted while programming and forgot which
feature I was programming. What should I do?
• Return to 'Idle' Programming Mode and start
over. You will not be able to return to
Programming Mode (the radio does not provide
further way to let you know the specific stage you
are at in the Programming Mode).
• Therefore you can:
• Long press the PTT button. The radio will
return to 'Idle' Programming Mode or,
• Turn OFF the radio and enter Programming
Mode again. (Refer to "Entering Advanced
Configuration Mode" on page 36 for more
information)
I am trying to program a frequency (or a code) value
but the radio would not do it. It rolled over and took me
back to value '0'.
• The radio disallows you to program any value
that is not available in the frequencies and codes
pool. For example, if you try to program code
220, the radio would not accept it as the
maximum value allowed is 219. Same goes for
the frequencies. Refer to the "Frequency and