HANDS-FREE USE/VOX
Accessory Port/
Connector
Motorola Solutions RDX Series radios can operate
hands-free (VOX) when used with compatible VOX
accessories.
With Compatible VOX Accessories
The default factory setting for VOX sensitivity level is
OFF (level '0'). Before using VOX, set VOX level to a
level different from '0' via the Customer Programming
Software (CPS). Then, perform the following steps:
1.
Turn the radio OFF.
2.
Open accessory cover.
3.
Insert the audio accessory's plug firmly into
accessory port.
4.
Turn radio ON. The LED Indicator will blink
double red
5.
Lower radio volume BEFORE placing
accessory near ear.
VOX
6.
To transmit, speak into accessory microphone
Accessory
and to receive, stop talking.
7.
VOX can be temporarily disabled by pressing
the PTT button or by removing the audio
accessory.
VOX can also be activated using the (Menu) button
without using the CPS.
Note:
To order accessories, refer to:
www.motorolasolutions.com/RDX,
call 1 (800) 448-6686, or contact your
Motorola Solutions point of purchase.
33
English