Port Settings; Web Port Settings - Steca Grid Connect Instructions D'installation Et De Service

PORT SETTINGS

8-2-1
> Web port
Data port
EN
Port settings
If the StecaGrid Connect is directly connected to a PC, you do not need to make
any port settings.

Web port settings

1 1
Press the arrow keys to navigate to the LAN SETTINGS menu.

2 2
Open the LAN SETTINGS menu by pressing the Enter key.

3 3
Press the arrow keys until you reach the Port settings menu item.

4 4
Open the PORT SETTINGS menu by pressing the Enter key.

5 5
Press the Enter key to open the web port display.

The menu item Port settings shows the current web port number of

the StecaGrid Connect.
6 6
Press the Enter key to select the web port number.

The number blinks.

7 7
Change the web port number using the arrow keys.

8 8
Press the Enter key to set the web port number.

NOTE
Activate the LAN settings when you do not wish to make any further LAN set-

tings (see page 41).
71.716 | 07.06
39