Configuration; Introduction; Ip Settings; Setting The Ip Address - Steca Grid Connect Instructions D'installation Et De Service

Configuration

Configuration relating to the switch is normally not necessary. The configuration
usually relates to the PC, router or similar device connected behind the switch.
Proceed with the configuration according to the appropriate section of this man-
ual. Perform the appropriate configuration for every connected StecaGrid Connect
device.
NOTE
It is important to assign a unique IP address to every StecaGrid Connect.

Configuration

Introduction

Use the inverter display to correctly configure the StecaGrid Connect LAN.
Button Designation
A Cancel
B Up Arrow
C Down Arrow
D Enter
NOTE
Further information is provided in the device documentation of your inverter.


IP settings

The IP settings of the StecaGrid Connect must always be configured.

Setting the IP address

1 1
Press the arrow keys to navigate to the LAN SETTINGS menu.

36
Function
Navigates to the next highest level
in the menu structure.
Navigates to the previous menu
item in a list.
Navigates to the next menu item
in a list.
Confirms your selection.
71.716 | 07.06
EN
B
A
C
D