Your Stecagrid Connect; Important Safety Instructions; Steca Service - Steca Grid Connect Instructions D'installation Et De Service

EN

Your StecaGrid Connect

The StecaGrid Master inverter can be upgraded with StecaGrid Connect. StecaGrid
Connect is a standard network interface (TCP/IP, Ethernet). The StecaGrid Con-
nect standard package contains a web server allowing you to access your current
power and yield data via an Internet browser. The data from any connected slave
inverters is also provided. The associated StecaGrid Connect software is available
in an end-customer version and a solar installer version.

Important Safety Instructions

WARNING
Risk of death by electrocution!
The StecaGrid inverter may only be connected to the mains grid by a qualified

electrician in accordance with the regulations of the IEC standard 60364, the
VDEW guidelines / TAB 000 applicable in Germany, and the regulations of the
the local power distribution company.
Always disconnect the inverter from the power supply when working on the

inverter or the solar system.
Make sure that the power supply cannot be unintentionally switched on.

Do not interrupt the DC connection between the solar modules and between

the solar modules and the inverter while current is flowing. If the DC connec-
tion has to be interrupted, always first disconnect the inverter from the grid.
Thoroughly read the instructions in this handbook before beginning the installa-
tion.

Steca Service

In the case of complaints or faults, we request that you contact the local supplier
from whom you purchased the product. They will help you with all issues you may
have.
Europe
Steca Elektronik GmbH
Mammostrasse 1
87700 Memmingen
Germany
Fon +49 700 STECAGRID
+49 700 7834743
Fax +49 8331 8558 13
E-Mail service@stecasolar.com
71.716 | 07.06
5