Setting The Subnet Mask - Steca Grid Connect Instructions D'installation Et De Service

IP SETTINGS
> Ip address
Subnet mask
Default Gateway
MAIN MENU 8
> LAN SETTINGS
------------------
PERFORMANCE
EN
2 2
Press the Enter key to open the LAN SETTINGS menu.

3 3
Press the Enter key to open the IP SETTINGS menu.

4 4
Press the Enter key to display the IP address.

The menu item IP settings shows the current IP address of the

StecaGrid Connect.
5 5
Press the Enter key to select the first number.

The first number blinks.

6 6
Change the first number with the arrow keys. The number changes more

quickly when you hold the key down.
7 7
Press the Enter key to set the first number.

The second number blinks.

8 8
Change the second number with the arrow keys.

9 9
Press the Enter key to set the second number.

The third number blinks.

10 10
Change the third number with the arrow keys.

11 11
Press the Enter key to set the third number.

The fourth number blinks.

12 12
Change the fourth number with the arrow keys.

13 13
Press the Enter key to set the fourth number.

NOTE
Activate the LAN settings when you do not wish to make any further LAN set-

tings (see page 41).

Setting the subnet mask

1 1
Press the arrow keys until you reach the LAN SETTINGS menu item.

71.716 | 07.06
37