Steca Grid Connect Instructions D'installation Et De Service page 27

EN
Remove the protective packaging from the StecaGrid Connect.
4 4

Hold the StecaGrid Connect at the sides.
5 5
Note the MAC address of the StecaGrid Connect. You need the MAC ad-

dress in order to display the data of your photovoltaic system.
Carefully insert the StecaGrid Connect into one of the slots provided on
6 6

the main board of the StecaGrid Master.
7 7
Screw an M16 eye bolt to the base of the connection box.

71.716 | 07.06
7