Burg Wächter TSE 5000 Série Instructions De Montage Et Mode D'emploi page 27

Create User with E-Key submenu
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 2 key until reaching the Administrator menu
– Confirm with
– Confirm with
– Scroll using the 2 key until reaching the "Create User: E-Key" item
– Confirm with
– Enter the administrator code in order to acquire the authorisation
for programming
– The next free memory cell is indicated (e. g. USER.003), press
– Switch the E-KEY into programming mode (see instructions E-KEY)
– Confirm 2 xwith
– "Data has been saved" is displayed
Create User with Fingerprint submenu
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 2 key until reaching the Administrator menu
– Confirm with
– Confirm with
– Scroll using the 2 key until l reaching the "Create User: Fingerprint" item
– Confirm with
– Enter the administrator code in order to acquire the authorisation
for programming
– "Register finger" is displayed
– Move the finger to be registered several times centrally over the sensor
(the number of moves is indicated on the display)
– "User_XXX_FP successfully registered" is displayed
Submenu Assign E-KEY
Using this function, you can subsequently assign an E-KEY radio code to an
already existing user. For this purpose, proceed as follows:
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 2 key until reaching the Administrator menu
– Confirm with
– Scroll using the 2 key until reaching the "Assign E-Key" item
– Enter the administrator code in order to acquire the authorisation
for programming
– Scroll till reaching the user, to whom you intend to assign an E-Key,
and confirm 2 x with
– Switch the E-KEY into programming mode (see instructions E-KEY)
– Once the E­KEY is in programming mode, confirm on the keypad with
– "Data has been saved" is displayed
Submenu Delete
Using this menu, you can delete a user or an E-KEY.
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 2 key until reaching the Administrator menu
– Confirm with
– Scroll using the 2 key until reaching the "Delete" item
ME TSE PRIME
key
The "Create User" menu item appears
key
The "Create User" menu item appears
key
key
English | 29