Burg Wächter TSE 5000 Série Instructions De Montage Et Mode D'emploi page 22

Dear customer,
Thank you very much for your decision for the TSE Series 5000 electronic
locking system by BURG-WACHTER. This system has been developed
and manufactured using the latest technical potential and satisfies high
security requirements. The electronic cylinder can be used easily without
any drilling and installation of cables in any door prepared for profile
cylinder up to a door thickness of 118 mm (59 / 59, measured at the central
detent bolt). The electronic cylinder is perfectly suitable for both new
installations and upgrading.
Besides this, you have diverse additional options, e. g. on which identification
medium shall be used. You can find out more on the following pages.
Remove the battery protection strip from the inner knob in order
to energise the cylinder.
Important: Please read the entire User Manual before you start
programming. We hope you enjoy your new locking system.
TSE Set 5021 PINCODE
The electronic cylinder operates using a 6-digit numeric code.
Optionally, the TSE 5103 E-KEY remote key can as well be used.
Functions (standard)
– Total number of users: up to 48
– Also an E-KEY can be assigned to each pin code user
(except for administrator).
Optional locking media
– TSE 5103 E-KEY remote key
Additional functions available using the optional
TSE Software, for example:
– User administration
– Time and calendar functions
– Assignment of authorisations
– History functions
Administratorcode
– Factory set to 1-2-3-4-5-6 (please be sure to change)
Optical signalling
The optical signal in form of a LED is incorporated in the knob on
the inner side of the door. This LED informs you on the following:
– 1 xbrief: lock has been opened
– 2 xbrief: lock has been shut
– every 5 sec. 1 x brief: permanent opening activated
– 1 x brief, 1 x long, 2 sec. pause, repetition: lock in programming mode
– 5 x brief, 2 sec. pause, repetition after 20 sec.: cylinder battery empty
24 | English TSE PRIME