Technical Data - Burg Wächter TSE 5000 Série Instructions De Montage Et Mode D'emploi

Technical data

Blocking times
Display
Power supply for
keypad
Power supply for
cylinder
Permissible
ambient
conditions
Keypad protection
In case the temperature exceeds the specified range, a corresponding warning message is
*
indicated on the display. Provide for appropriate corrective action!
TSE Set 5022 FINGERSCAN
The electronic cylinder operates using a fingerscan. In addition, the cylinder
can be operated by entering the 6-digit numeric code, or also using the
optionally delivered TSE 5103 E-KEY.
In add. to that, you can also use the 6-digit numeric code, as well as
the TSE 5103. E-Key in order to control the cylinder.
Up to 24 fingers can be programmed using the keypad. The users are
created separately (USER XXX_FP). If a code and / or an E-KEY should
additionally be assigned to a user, it needs to be created separately.
Attention! The fingerscanner must not be cleaned with detergents.
Please use a slightly moist cloth for this purpose.
TSE 5022 FINGERSCAN functions (standard)
– Total number of users: up to 48, out of which 24 can
be programmed with fingerscan
– One E-KEY can be assigned to each code user (except administrator)
– Also a code can be assigned to every E-KEY user
Optional locking media
– TSE 5103 E-KEY
Additional functions available using the optional TSE Software,
for example:
– User administration
– Time and calendar functions
– Assignment of authorisations
– History functions
Administrator code
– Factory set to 1-2-3-4-5-6 (please be sure to change it)
ME TSE PRIME
After 3 x wrong code is entered 1 minute,
then always 3 minutes
Adjustable to 12 languages
2 xMIGNON LR6 AA ALKALINE
2 xMIGNON LR6 AA ALKALINE
-15 °C / +50 °C / up to 93 %
rel. air humidity (noncondensing)
Allowed temperature range: -20 °C / +50 °C
*
As a result of extreme temperature changes, the
display can react slowly or darken.
IP65
English | 25