Burg Wächter TSE 5000 Série Instructions De Montage Et Mode D'emploi page 24

Optical signalling
The optical signal in form of a LED is incorporated in the knob on
the inner side of the door. This LED informs you on the following:
– 1 xbrief: lock has been opened
– 2 xbrief: lock has been shut
– every 5 sec. 1 x brief: permanent opening activated
– 1 x brief, 1 x long, 2 sec. pause, repetition: lock in programming mode
– 5 x brief, 2 sec. pause, repetition after 20 sec.: cylinder battery empty
Technical data
Blocking times
Display
Power supply for
keypad
Power supply for
cylinder
Permissible ambient
conditions
*
Keypad protection class IP55
In case the temperature exceeds the specified range, a corresponding warning message is
*
indicated on the display. Provide for appropriate corrective action!
TSE Set 5013 E-KEY
The electronic cylinder operates using the E-KEY remote key. The principle
of its function is similar to that of the car locking system. The cylinder can be
controlled when the button is pressed once. The E-KEY can be subsequently
programmed by means of a keypad or of a TSE software. The radio range of
the E-KEY is up to 3 m.
TSE 5013 E-KEY functions (standard)
– Total number of users: up to 48
Optional locking media
– TSE 5151 Keypad PIN
– TSE 5152 Keypad FS (up to 24 fingerscans possible)
Additional functions available using the optional TSE Software,
for example:
– User administration
– Time and calendar functions
– Assignment of authorisations
– History functions
26 | English
After 3 x wrong code is entered 1 minute,
then always 3 minutes
Adjustable to 12 languages
2 xMIGNON LR6 AA ALKALINE
2 xMIGNON LR6 AA ALKALINE
-15 °C / +50 °C / up to 93 %
rel. air humidity (noncondensing)
Allowed temperature range: -20 °C / +50 °C
As a result of extreme temperature changes, the
display can react slowly or darken.
TSE PRIME