Basic Functions; Before Fi Rst Use; Unpacking The Product Contents; Inserting Batteries In The Remote Control - Cleanmaxx 05895 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic functions

This robotic vacuum cleaner vacuums up loose dirt through the nozzle (11). It comes
with side brushes (7) to clean walls and furniture.
The device cleans the fl oor by vacuuming in a variety of patterns.
You can also use the directional buttons to steer the robotic vacuum cleaner
manually.
The robotic vacuum cleaner has three cleaning modes and can be confi gured to
automatically start vacuuming at a set time.
Its sensors (3, 8) allow the device to detect walls or other obstacles and adjust its
path accordingly.
The sensors (8) on the bottom side of the device detect steps or other depressions
to prevent the device from falling.
If the rechargeable battery is almost empty, the device will automatically start to look
for the charging station.
Before fi rst use
Before you can use the device, you must:
unpack the product contents and remove all transport and packaging elements,
insert batteries in the remote control,
fi tting the side brushes (7),
set up the charging station,
charge the device's rechargeable battery.

Unpacking the product contents

ATTENTION!
Keep children and animals away from the packaging material. Danger of suffocation
exists!
Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damages from transport. If you identify
damages to the components, do not (!) use them, instead contact the customer
service.
Remove all transport guards if present and the protective foil from the sensor of the
charging station.

Inserting batteries in the remote control

1. Open the battery compartment cover on the back of the remote control by pressing
the catch together with your thumb and fold up the cover.
2. Insert the batteries in the battery compartment. Make sure that the polarity is correct
as indicated in the compartment (+ / –).
3. Put the battery compartment cover back on the battery compartment and fold it into
the closed position. It must audibly lock into place.
When the remote control starts to lose power, the batteries must be replaced.
05895_DE-EN-FR-NL_A5_V2.indb 25
05895_DE-EN-FR-NL_A5_V2.indb 25
25
EN
09.02.2017 15:01:13
09.02.2017 15:01:13

Publicité

Table des Matières
loading

Table des Matières