Product Contents And Product Overview; Prior To Fi Rst Use - Cleanmaxx PC-C001-01 Mode D'emploi

EN

Product contents and product overview

11
10
9
8
7
6
1 Motor fi lter (located behind the dust bin
in the vacuum cleaner housing)
2 Button for re-coiling the mains cord
3 On/Off switch
4 Exhaust fl ap with exhaust fi lter (located
behind the exhaust fl ap)
5 Mains cord with mains plug
Prior to fi rst use
Unpacking the product contents
ATTENTION!
• Keep children and pets away from the packaging. Risk of suffocation!
• Unpack all parts and make sure that the product contents are complete (see section
"Product contents and product overview") and check for any transport damage. If any
components are damaged, do not use them(!). Instead contact our customer service.
Inserting/removing the suction tube
B A
07420_DE-EN_FR-NL_A5_V1.indb 18 07420_DE-EN_FR-NL_A5_V1.indb 18
18
6 Floor nozzle
7 Telescoping tube
8 Suction hose
9 Dust bin fastener
10 Dust bin
11 Release button for the dust bin
1. Insert the end of the suction tube in the port (A) on the
front of the device. It must audibly lock into place.
2. To remove the suction tube, you must depress and hold
the two release buttons (B) on the end of the tube and pull
out the tube at the same time.
1
2
3
4
5
15.07.2015 09:18:36 15.07.2015 09:18:36