Table des Matières
Publicité
How to use the automatic locking mode
(Outboard front passenger seating position only) for use with child
safety seats
• Buckle the combination lap and
shoulder belt.
• Grasp the shoulder portion and
pull downward until the entire
belt is pulled out.
• Allow the belt to retract. As the belt retracts, you will hear a clicking
sound. This indicates the seat belt is now in the automatic locking
mode.
How to disengage the automatic locking mode
Disconnect the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.
WARNING: After any vehicle collision, the entire seat belt
system should be checked for proper operation by an authorized
dealer. Verify that the automatic locking retractors" in all outboard
seating positions are functioning properly. Additionally check that the
automatic locking mode feature for child safety seat in the passenger
outboard seating position is functioning properly.
Seating and Safety Restraints
85
Publicité
Table des Matières
