Table des Matières
Publicité
Removing the spare tire or spare tire and tether (if equipped)
1. Assemble the jack handle to the lug wrench as shown in the
illustrations.
When connecting the jack handle, assemble the following:
• One handle extension and one
typical extension. To assemble,
slide parts together. To
disconnect, press the button and
pull apart.
• One wheel nut wrench. Press the
button and slide together.
2. If equipped, unlock and remove
the spare tire carrier lock from
the rear access hole located just
above the rear bumper and
below the tailgate.
Roadside Emergencies
209
Publicité
Table des Matières
