Table des Matières
Publicité
Driver Controls
Reducing speed while using speed control
To reduce a set speed:
• Press and hold CST- until you get to the desired speed, then release
the control. You can also use CST- to operate the tap-down function.
Press and release the CST- to decrease the set speed in 1 mph
(1.6 km/h) increments.
• Press the brake pedal or the clutch pedal (if equipped) until the
desired vehicle speed is reached, press SET+.
Turning off speed control
To turn off the speed control, press OFF or turn off the ignition.
Note: When you turn off the speed control or the ignition, your speed
control set speed memory is erased.
Note: Fully pressing the clutch pedal may cause a flare in engine RPM
as the throttle is returned to idle. This is normal.
64
Publicité
Table des Matières
