Mazda Truck B Série 2010 Manuel Du Propriétaire page 185

Table des Matières

Publicité

Recommended shift speeds
Downshift according to the following charts for your specific
engine/drivetrain combination:
Upshift and downshift according to the following charts:
Shift from:
1 -2
2 - 3
3 - 4
4 - 5 (Overdrive)
Shift from:
5 (Overdrive) - 4
4 - 3
3 - 2
2 - 1
Reverse
1. Make sure that your vehicle is
at a complete stop before you
shift into R (Reverse). Failure
to do so may damage the
transmission.
2. Move the gearshift lever into the
neutral position and wait at
least three seconds before
shifting into R (Reverse).
Note: The gearshift lever can only be moved into R (Reverse) by moving
it from left of 3 (Third) and 4 (Fourth) before shifting into R (Reverse).
This is a lockout feature that protects the transmission from accidentally
being shifted into R (Reverse) from 5 (Overdrive).
Parking your vehicle
1. Apply the brake and shift into the neutral position.
2. Fully apply the parking brake, then shift into 1 (First).
Upshifts
Transfer case position (if equipped)
2WD and 4H
10 mph (16 km/h)
19 mph (26 km/h)
28 mph (43 km/h)
40 mph (68 km/h)
Maximum downshift speeds
Transfer case position (if equipped)
2WD and 4H
55 mph (88 km/h)
45 mph (72 km/h)
35 mph (56 km/h)
20 mph (32 km/h)
Driving
4L
4 mph (6 km/h)
8 mph (10 km/h)
12 mph (16 km/h)
16 mph (26 km/h)
4L
22 mph (34 km/h)
18 mph (27 km/h)
14 mph (21 km/h)
8 mph (11 km/h)
183

Publicité

Table des Matières
loading

Table des Matières