Publicité
Les langues disponibles
Les langues disponibles
FT- - - - 847 ONLY
FT
847 ONLY - - - - 3.5mm Stereo "Data I/O" jack
3.5mm Stereo "Data I/O" jack
FT
FT
847 ONLY
847 ONLY
3.5mm Stereo "Data I/O" jack
3.5mm Stereo "Data I/O" jack
NOTE:
NOTE:
NOTE:
NOTE: This jack works great on HF, but it does not appear to work on VHF/UHF. For VHF/UHF operation, you'll need to use the 8-pin Mic jack, or the 6-pin mini-DIN Data Port.
For HF operation on the FT-847, we recommend that you attach the SignaLink to the "Data I/O" jack. This jack works for virtually all sound card digital and voice modes, and will
let you keep your microphone plugged into the radio.
We do not stock a cable for this jack however, so you will need to build your own using one of our un-terminated radio cables (p/n SLCABNC). The picture below shows how to
wire this cable and install the jumper wires.
The values shown below for R1 and C1 have been used for years in a number of our products.
You can use these values, or those shown in the FT-847 manual. Both will work just fine.
TOP
(use SLUSBNC, SL1+NC or SLCABNC)
(use SLUSBNC, SL1+NC or SLCABNC)
(use SLUSBNC, SL1+NC or SLCABNC)
(use SLUSBNC, SL1+NC or SLCABNC)
Copyright © 1996-2014 Tigertronics - All Rights Reserved | BayPac, SignaLink, and TigerTrak are trademarks of Tigertronics
APRS is a trademark of Bob Bruninga | All other trademarks are the property of their respective owners
Publicité
