Signalink USB Manuel D'installation Et Fonctionnement page 49

5 5 5 5 - - - - Pin DIN Accessory Connector Pin DIN Accessory Connector - - - -
Pin DIN Accessory Connector Pin DIN Accessory Connector
JP- - - - 1 1 1 1 JP JP JP
Pin-out
Pin 1 - Mic Input
Pin 2 - GND
Pin 3 - PTT
Pin 4 - AF Output
Pin 5 - NC
8 8 8 8 - - - - Pin DIN Accessory Connector Pin DIN Accessory Connector Pin DIN Accessory Connector - - - - Pin DIN Accessory Connector
JP JP- - - - 1 1 1 1
JP JP Pin-out
Pin 1 - Aux In
Pin 2 - GND
Pin 3 - PTT
Pin 4 - Line Out
Pin 5 - NC
Pin 6 - Line Out
Pin 7 - FSK
Pin 8 - NC
TOP
(use SLUSB5PD, SL1+5PD, or SLCAB5PD) (use SLUSB5PD, SL1+5PD, or SLCAB5PD)
(use SLUSB5PD, SL1+5PD, or SLCAB5PD) (use SLUSB5PD, SL1+5PD, or SLCAB5PD)
Radio Models
Argonaut V
Jupiter
Omni VII
Pegasus
Eagle, Orion & Orion II Only Eagle, Orion & Orion II Only Eagle, Orion & Orion II Only Eagle, Orion & Orion II Only (use SLUSB8PD, SL1+8PD, or SLCAB8PD) (use SLUSB8PD, SL1+8PD, or SLCAB8PD) (use SLUSB8PD, SL1+8PD, or SLCAB8PD) (use SLUSB8PD, SL1+8PD, or SLCAB8PD)
Radio Models Notes
Eagle **On the original Orion, the "Audio" menu determines what
Orion** audio is available on pins 4 and 6, so the SPKR jumper will
Orion II** need to be set accordingly.
TEN-TEC Delta II **On the Orion II, Pin #4 is ALWAYS the audio output.
Users: Our 8-pin
DIN cable is NOT Power is not available on this connector, so you will need to
compatible with use external power for the SignaLink Model SL-1+.
the TEN-TEC
Delta II. You must
connect the
SignaLink to this
radio's 4-pin Mic
jack.
Notes
The Ten-Tec Jupiter must be in "Line" to use the ACCY jack
(set in radio menu).
Power is not available on this connector, so you will need to
use external power for the SignaLink Model SL-1+.