Signalink USB Manuel D'installation Et Fonctionnement page 50

4 4 4 4 - - - - Pin Round Pin Round Mic Connector Pin Round Pin Round Mic Connector Mic Connector Mic Connector (use SLUSB4R, SL1+4R, SL1 (use SLUSB4R, SL1+4R, SL1 (use SLUSB4R, SL1+4R, SL1 (use SLUSB4R, SL1+4R, SL1- - - - 4R or SLCAB4R)
JP- - - - 1 1 1 1 JP JP JP Pin-out
Pin 1 – GND
Pin 2 – Mic Input
Pin 3 – PTT
Pin 4 – N/C
8 8 8 8 - - - - Pin Round Mic Connector Pin Round Mic Connector Pin Round Mic Connector Pin Round Mic Connector (use SLUSB8R, SL1+8R, SL1 (use SLUSB8R, SL1+8R, SL1 (use SLUSB8R, SL1+8R, SL1 (use SLUSB8R, SL1+8R, SL1- - - - 8R or SLCAB8R)
JP- - - - 1 1 1 1 JP
JP JP Pin-out
Pin 1 – N/C
Pin 2 – N/C
Pin 3 – N/C
Pin 4 – N/C
Pin 5 – N/C
Pin 6 – PTT
Pin 7 – GND
Pin 8 – Mic Input
YAESU
4R or SLCAB4R) 4R or SLCAB4R) 4R or SLCAB4R)
Radio Models Notes
FT-7B Power is not available on this connector, so you will need to
FT-101/FT-101ZD use external power for the SignaLink Model SL-1+.
FT-221
FT-227R
FT-901DM
8R or SLCAB8R) 8R or SLCAB8R) 8R or SLCAB8R)
Radio Models Notes
FT-1 **On the FT-890, FT-980, FT-990, FT-1000 and the FT-1000D, you should
FT-102 also jumper Pin #2 and Pin #5 to Ground.
FT-107/107M
FT-290 **On the FT-847, FT-920, FT-950, FT-1000MP, and FTdx5000 you should
FT-707 also jumper Pin #5 to Ground.
FT-736/736R
FT-747/757
Speaker audio and power are available on some models. Check your radio
FT-757GX/767GX
manual for availability of these signals and add the appropriate jumpers.
FT-840
FT-847**
FT-890**
FT-920**
FT-950**
FT-980**
FT-990**
FT-1000/1000D**
FT-1000MP**
FT-2000
FTdx5000**
FT-2200 / FT-5100