Publicité
Les langues disponibles
Les langues disponibles
RJ
RJ- - - - 45 Mic Connector
RJ
RJ
45 Mic Connector
45 Mic Connector
45 Mic Connector
(use SLUSBRJ4, SL1+RJ45, SL1
(use SLUSBRJ4, SL1+RJ45, SL1- - - - RJ45 or SLCABRJ4)
(use SLUSBRJ4, SL1+RJ45, SL1
(use SLUSBRJ4, SL1+RJ45, SL1
JP- - - - 1 1 1 1
JP
JP
JP
Pin-out
Pin 1 – NC
Pin 2 –
Pin 3 – Mic
Pin 4 – GND
Pin 5 – PTT
Pin 6 – GND
Pin 7 –
Pin 8 – NC
6 6 6 6 - - - - pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
JP
JP
JP
JP- - - - 1 1 1 1
Pin-out
Pin 1 – Data In
Pin 2 – Ground
Pin 3 – PTT
Pin 4 – 9600 Out
Pin 5 – 1200 Out
Pin 6 – Squelch
RJ45 or SLCABRJ4)
RJ45 or SLCABRJ4)
RJ45 or SLCABRJ4)
Radio Models
TK-7102H
Speaker**
TM-251/255/261/271/281
TM-451/455/461/641/642
TM-732/733/741/742
TM-941/942
TM-D700/700A
+8V**
TM-D710/710A/E
TM-G707
TM-V708
TM-V7A/V71A
TS-480HX/SAT
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
Radio Models
TM-251/255
TM-271**/271A**
TM-451/455
TM-D700/700A
TM-D710/710A/E
TM-G707
TM-V708
TM-733A
TM-V7/V7A/V71A
TS-480HX/SAT
Notes
**Speaker audio and power are available on some models.
Check your radio manual for availability of these features
and add the appropriate jumpers.
Notes
For special signals requiring un-filtered "discriminator"
audio, you will need to move the "SPKR" jumper to pin #4
(9600 baud output). Note that some newer radios do NOT
provide this output, so this may not apply to your radio.
Power is not available on any 6-pin mini DIN Data Port, so
you will need to use external power for the SignaLink
Model SL-1+.
**Only European models of the TM-271 and TM-271A
have the 6-pin mini-DIN Data Port. All other models will
need to use the RJ-45 Mic cable.
Publicité
