Publicité
Les langues disponibles
Les langues disponibles
6 6 6 6 - - - - pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
pin Mini DIN Data Port Connector
JP- - - - 1 1 1 1
JP
JP
JP
Pin-out
Pin 1 – Data In
Pin 2 – Ground
Pin 3 – PTT
Pin 4 – 9600 Out
Pin 5 – 1200 Out
Pin 6 – Squelch
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
Radio Models
IC-207H/208H
IC-2720H
IC-2800**
IC-2820
IC-703**/706MKIIG**
IC-746PRO**
IC-7000**
IC-7100
IC-7400
IC-910H##
ID-880
IC-9100
Notes
For special signals requiring un-filtered "discriminator"
audio, you will need to move the "SPKR" jumper to pin #4
(9600 baud output). Note that some newer radios do NOT
provide this output, so this may not apply to your radio.
Power is not available on any 6-pin mini DIN Data Port, so
you will need to use external power for the SignaLink Model
SL-1+.
**IC-703 - If you are using the Data Port on this radio, then
you must set menu #36 to "1200".
**IC-706MKIIG - If you are using the Data Port on this
radio, then you must set menu #29 to "1200".
**IC-746PRO / IC-7000 - Some users have reported that
this radio has a very sensitive Data Port, making power
adjustments with the SignaLink USB's TX knob somewhat
touchy. If this is the case with your radio, then please click
here
for a simple solution to this problem.
**Mic audio is NOT muted on this radio.
##You will need to connect the SignaLink to the "Main"
data port connection on this radio (not the "Sub" port).
Publicité
