Publicité
Les langues disponibles
Les langues disponibles
24
24- - - - pin DIN Accessory Port Connector
24
24
pin DIN Accessory Port Connector - - - - Tigertronics does not manufacture a cable for the ICOM 24-pin Accessory Port connector, but you can
pin DIN Accessory Port Connector
pin DIN Accessory Port Connector
easily build one using our un-terminated radio cable (p/n SLCABNC). To build your cable, simply wire it straight-through for pin numbers 1-8 (Pin
#1 to Pin #1, Pin #2 to Pin #2, etc.). Note that your cable MUST wired straight-through or the jumper settings shown below will NOT work, and you
might
DAMAGE YOUR RADIO OR THE SIGNALINK!
JP
JP
JP
JP- - - - 1 1 1 1
Pin-out
Pin 1 - NC
Pin 2 - +13.8V
Pin 3 - PTT
Pin 4 - AF Out
Pin 5 - Mic Input
Pin 6 - NC
Pin 7 - NC
Pin 8 - GND
Pins 9-24 NC
TOP
8 8 8 8 - - - - Pin Round Mic Connector
Pin Round Mic Connector
(use SLUSB8R, SL1+8R, SL1- - - - 8R or SLCAB8R)
(use SLUSB8R, SL1+8R, SL1
Pin Round Mic Connector
Pin Round Mic Connector
(use SLUSB8R, SL1+8R, SL1
(use SLUSB8R, SL1+8R, SL1
JP- - - - 1 1 1 1
JP
JP
JP
Pin-out
Pin 1 - N/C
Pin 2 - N/C
Pin 3 - N/C
Pin 4 - +9V
Pin 5 - GND
Pin 6 - PTT
Pin 7 - Mic GND
Pin 8 - Mic Input
TOP
Radio Models
Notes
IC-251AE
Pins marked as "NC" are not used by the SignaLink,
IC-730/751
but might be connected internally inside the radio.
Japan Radio Company
8R or SLCAB8R)
8R or SLCAB8R)
8R or SLCAB8R)
Radio Models
Notes
JST-145/245
Publicité
