Publicité
Les langues disponibles
Les langues disponibles
6 6 6 6 - - - - pin Mini DIN Data Por
pin Mini DIN Data Port Connector
t Connector
pin Mini DIN Data Por
pin Mini DIN Data Por
t Connector
t Connector
JP
JP
JP- - - - 1 1 1 1
JP
Pin-out
Pin 1 – Data In
Pin 2 – Ground
Pin 3 – PTT
Pin 4 – 9600 Out
Pin 5 – 1200 Out
Pin 6 – Squelch
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
(use SLUSB6PM, SL1+6PMD or SLCAB6PM)
Radio Models
Notes
FT-100/100D
For special signals requiring un-filtered "discriminator" audio, you will
FT-817/817ND
need to move the "SPKR" jumper to pin #4 (9600 baud output). Note
FT-450**
that some newer radios do NOT provide this output, so this may not
FT-840**
apply to your radio.
FT-847**
FT-857/897
Power is not available on any 6-pin mini DIN Data Port, so you will
FT-950**
need to use external power for the SignaLink Model SL-1+.
FT-1500M
FT-7100/7800R
**FT-450 - Some users have reported that this radio has a very
FT-7900R
sensitive Data Port, making power adjustments with the SignaLink
FT-8100
USB's TX knob somewhat touchy. If this is the case with your radio,
FT-8500
then please click
FT-8800R/8900R
FTDX-1200
**FT-950 - Some users of this radio have reported that the Notch Filter
FTDX-3000
is turned on after a hard reset. If you see a "hole" in your waterfall
FTM-350**
display, then please make sure that your Notch Filter is turned OFF.
**The 6-pin mini-DIN Data Port on the
FT-840 and FT-847 supports FM and LSB only. It may also function
only on VHF (not HF). Because of this, we recommend using the Mic
jack, or on the FT-847, the Data I/O jack (see below).
**The FTM-350 requires Yaesu's CT-141 adapter to convert from it's
(unusual) 8-pin mini-DIN connector to a standard 6-pin mini-DIN.
This adapter should be available from any authorized Yaesu dealer.
here
for a simple solution to this problem.
Publicité
