Publicité
Les langues disponibles
Les langues disponibles
Pin-out
Pin 1 – N/C
Pin 2 – N/C
Pin 3 – N/C
Pin 4 – Mic GND
Pin 5 – Mic
Pin 6 – PTT
Pin 7 – GND
Pin 8 – N/C
5 5 5 5 - - - - Pin Din Packet Connector
Pin Din Packet Connector
Pin Din Packet Connector
Pin Din Packet Connector
(use SLUSB5PD,
(use SLUSB5PD,
(use SLUSB5PD,
(use SLUSB5PD, SL1+5PD or SLCAB5PD)
JP
JP- - - - 1 1 1 1
JP
JP
Pin-out
Pin 1 – Data In
Pin 2 – GND
Pin 3 – PTT
Pin 4 – Data Out
Pin 5 – NC
Radio Models
Notes
FT-450
Power and Receive Audio are not available on this connector. Please
FT-600
see the SignaLink Installation Manual for instructions on providing
FT-817
External Power (SL-1+ only) and Receive Audio.
FT-897
FT-900
SL1+5PD or SLCAB5PD)
SL1+5PD or SLCAB5PD)
SL1+5PD or SLCAB5PD)
Radio Models
Notes
FT-920**
Power is not available on this connector, so you will need to use external power
FT-1000**
for the SignaLink Model SL-1+.
FT-1000D**
##
FT-1000MP
**On the FT-920, the AFSK/FSK switch MUST be set to AFSK, and you must
FT-1000MPMKV**
be in "Data" mode (push the front panel "Data" button). The Mic Gain control
FT-1000MPMKV-
appears to affect the operation of the Packet jack, so we suggest setting this to
Field**
50% and then adjusting as needed..
FT-2000
FTDX-5000/D/MP
**The FT-1000MPMKV and FT-1000MKV Field MUST be in "Packet" mode
FTDX-9000/D/MP
(NOT usb!) for digital operation. For PSK31 or other "USB" digital modes,
you'll need to set your radio's "User Mode" (selection 8-6) to "PS31U". This will
configure the radio to look at the Packet jack and use the correct side band for
PSK31. For more detailed information on this (including settings for other
modes), see "Digital Modem Operation" in your radio manual.
**The 5-pin DIN jack on this radio supports only FM and LSB, which are not
compatible with the majority of digital modes. We recommend connecting the
SignaLink to the Mic jack instead.
##Detailed setup information for this radio is now available thanks to Wade
Bolling, W5ERX. Please click
here
for details.
Publicité
