Publicité
Les langues disponibles
Les langues disponibles
13- - - - pin DIN Accessory Port Connector
13
pin DIN Accessory Port Connector
13
13
pin DIN Accessory Port Connector
pin DIN Accessory Port Connector
JP- - - - 1 1 1 1
JP
JP
JP
Pin-out
Tigertronics
manufactures a
special cable for
ICOM 13-pin
Accessory Ports. If
you would like to
build your own 13-
pin cable (not
recommended!),
please contact our
Technical Support
Staff for pin-out and
wiring information.
(use SLUSB13I, SL1+13PI or SLCAB13I)
(use SLUSB13I, SL1+13PI or SLCAB13I)
(use SLUSB13I, SL1+13PI or SLCAB13I)
(use SLUSB13I, SL1+13PI or SLCAB13I)
Radio Models
Notes
IC-703
For VHF operation on the IC-706 and IC-706MKII
IC-706/706MKII
you will need to move the PTT jumper to Pin #4.
IC-706MKIIG
IC-718**
For VHF/UHF operation on the IC-706MKIIG and
IC-970
IC-7000, you should turn the following menu item
IC-7000**
to OFF:
IC-7100**
IC-7200
Item #30 for IC-706MKIIG
IC-7410
IC-9100
Item #20 for IC-7000
This will force the radio to use the same PTT pin
for all bands so you will not need to change the
SignaLink's jumper settings.
**The IC-718 does NOT mute the Mic jack when
using the 13-pin Accy Port, so you will need to turn
the Mic Gain down.
**The IC-7000 does NOT mute the Mic jack when
using the 13-pin Accy Port, so you will need to turn
the Mic Gain down, or use the 6-pin Mini Din Data
Port instead.
**Some customers have reported that the new IC-
7100 doesn't mute the microphone jack, so you will
need to turn the Mic Gain down, or use the 6-pin
Mini Din Data Port instead.
Publicité
