Signalink USB Manuel D'installation Et Fonctionnement page 24

Les langues disponibles

3. In the list of displayed sound cards, select your

one time. Note that your list of sound cards will likely look different from the sample list

shown, so be sure that you select your computer's sound card -

4. Click the "Set Default" button to set your computer's sound card as the default card for

playback. Your computer's sound card should now have a green check mark next to it as

shown in the figure above.

NOTE: If the SignaLink's sound card is listed as the "Default Communication

NOTE:

If the SignaLink's sound card is listed as the "Default Communication

NOTE:

If the SignaLink's sound card is listed as the "Default Communication

Device" (indicated by a green colored telephone handset icon), then if possible,

Device"

(indicated by a green colored telephone handset icon), then if possible,

Device"

(indicated by a green colored telephone handset icon), then if possible,

we suggest setting another device (such as a modem) as the Default

Communicat

Communication Device.

Communicat

ion Device. If this is not possible, then you can leave it set to the

ion Device.

SignaLink's sound card. We have not noticed any negative affects form doing this.

SignaLink's sound card.

5. In the "Sound" window, select the "Recording" tab as shown below.

6. In the list of displayed sound cards, select your computer's microphone by clicking on it

one time.

7. Click the "Set Default" button to set your computer's microphone as the default sound card

for recording. Your computer's microphone should now have a green check mark next to it

as shown in the figure above. Click OK to keep the changes and close the Window.

If this is not possible, then you can leave it set to the

We have not noticed any negative affects form doing this.

computer's sound card

NOT

by clicking on it

USB Audio Codec!