Step 8: Check Lid Switch; Step 9: Check Installation - Alliance Laundry Systems W446I Manuel D'installation

Installation

Step 8: Check Lid Switch

Washer should stop filling, agitating and spinning
when lid is opened.
Figure 12
14
TLW1974N
TLW1974N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Step 9: Check Installation

Refer to Installer Checklist on the back cover of this
manual and make sure that washer is installed
correctly.
Run washer through one complete cycle to make sure
it is operating properly.
201940