Transport, Storage, Shipment; 3.3 Technical Specifications - Hürner EasyWeld 110 Mode D'emploi

H Ü R N E R S c h w e i ß t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Deutschland
Power Facing Tool - EasyWeld 110
(optional with EasyWeld 110)
Heating Element - EasyWeld 110
3.2

Transport, Storage, Shipment

The machine ships on a base plate and requires only to be set on a
surface where it will not slip. The shipment is properly wrapped and
packaged to avoid possible damage.
Immediately after receipt, make sure that the shipment is
complete and in a proper condition and notify the transporter
of any defects or missing part. Complaints at a later point
may no longer be eligible for remedy.
Info
3.3 Technical Specifications
EasyWeld 110 (T)
Operating range
Suitable materials
Power supply of facing tool/heating elem.
Carriage stroke
EasyWeld 110 model version
EasyWeld 110 T model version
Pwr input heating elem./facing tool
Dimensions of machine on base plate
EasyWeld 110 model version
EasyWeld 110 T model version
Weight of machine excluding base plate
Overall weight all components in box
EasyWeld 110, manual facing tool
EasyWeld 110, power facing tool
EasyWeld 110 T
Supplied reducer inserts
Version September 2016
Facing Tool Pushbutton
(hold pressed to
operate facing tool)
Fastening Knobs for
Horizontal Facing
Tool Adjustment
Fastening Knob for
Securing to Lower
Rod
Status Lamps of
Temperature
Control
Temperature
Control Selector
O.D. 20 - 110 mm
with tees up to 90 mm
PE, PP, and PVDF
230 V, 50/60 Hz
⅛
129 mm (5 ")
179 mm (7")
800 W and 560 W
492.5 x 350 x 178 mm (19⅜ x 13¾ x 7")
622 x 350 x 178 mm (24½ x 13¾ x 7")
approx. 9,2 kg (20.3 lbs.)
44.2 kg (97¼ lbs.)
45.4 kg (100 lbs.)
55 kg (121 lbs.)
20, 25, 32, 40, 50, 63, 75, 90 mm
HÜRNER EasyWeld 110 (T) User's Manual
Power Facing Tool - EasyWeld 110 T
(supplied with EasyWeld 110 T)
Heating Element - EasyWeld 110 T
7
EN