Special Functions - Migatronic PI 350 Mode D'emploi

Special functions

1. Open menu
3 secs
4. Change parameter
Parameters and menu selection
Exit from the USER menu
Open/Close the gas valve in order to purge the torch,
check the gas bottle and pressure reducer. Press "A"
to Open/Close the gas. Exiting the USER menu will close the gas
anyway.
Calibration of gas flow at 10 and 20 litres by means of
flowmeter (81010000).
Submenu for wire feeder
Exit from submenu
Active control of CWF
0 = no CWF (default)
1 = at least one CWF
2. Find menu selection
5. Exit menu
14
3. Select menu point
Exit menu
Active only in TIG
Only IGC
Active only in TIG
Active only in TIG
Only IGC
Active only in TIG
Submenu containing different options
Exit from submenu
Programs LOCK
0 = unlocked (default setting)
1 = locked P3 to P64
2 = locked P1 to P64
Panel LOCK
0 = unlocked (default setting)
1 = locked
2 = locked (as mode 1)