Getting Started - Gkp Setup Wizard; Purpose Of The Setup Wizard; Starting The Setup Wizard; Running The Setup Wizard - Parker AC30 Série Guide De Démarrage Rapide

Getting Started - GKP Setup Wizard

The GKP can be fitted remotely – see HA503711U001/U002 'Chapter 5: Installation – Control Module' for details.

Purpose of the Setup Wizard

The purpose of the setup wizard is to configure the drive in a clear and concise manner.
First familiarize yourself with either HA503711U001/U002 'Chapter 9: The Graphical
Keypad' or HA503711U003 'Chapter 4: The Graphical Keypad' for the keypad
functions.

Starting the Setup Wizard

The Setup Wizard is automatically invoked when the drive is reset to factory default
settings. The setup wizard may be invoked at any other time by navigating to the
Welcome Screen at the "top" of the menu tree the pressing the

Running the Setup Wizard

At each point in the wizard pressing the OK key selects the displayed
value and moves on to the next step. Pressing Soft key 1 moves back a step.
Pressing the UP and DOWN keys modifies the selected value.

Setup Wizard Stages

After selecting the required view level and language, the next option presented is "Set Factory Defaults". Changing this
parameter to TRUE then pressing OK resets all parameters back to the default value determined by the AC30 series
hardware configuration. If this choice is left FALSE the setup wizard starts with all parameters with their previously set
values. Accepting each choice without change by pressing OK will result in no change to the drive's configuration.
The rest of the Setup Wizard consists of a several sections. Each section corresponds to a functional component of the
drive, for example:
 Application selection
 IO Option, (including the Encoder)
 Analog input and output ranges
 Motor Data
If not required, any section may be skipped.
The default setting for all parameters depends on earlier answers and on the physical configuration of the drive. All data
entered is automatically saved without the need for any additional commands.

Finalising Setup

Once the Setup Wizard has been run to completion the feature is automatically disabled. Re-starting the drive will not
cause the Setup Wizard to be run again. (If it is desired to re-run the Setup Wizard, this can be achieved as detailed
above in "Starting the Setup Wizard").
For complete details go to HA503711U003 'Chapter 6: Setup Wizard'.

Ethernet Communications

Connecting and disconnecting the Ethernet cable.
See HA503711U003 'Chapter 8: Ethernet' for this information.
key, Soft Key 1.
Soft Key 1
 Motor Control
 Fieldbus options
 On-board Ethernet
 Auto tune
English
OK key
1-11