Siemens 6GK1970–5CA20–0AA2 Instructions De Montage page 278

SIMATIC NET PROFIBUS Plastic Fiber Optic
Stripping the Outer Jacket
of the SIMATIC NET PLASTIC FIBER OPTIC Standard Cable
Press the clamp of the cable knife in the
direction of the arrow. Insert the cable up
to a length of 20 cm (if you are fitting a
plug adapter, 30 cm).
Note: The cable knife must be set to a
cutting depth of 1.5 mm.
Make a second slit up to the end of the
cable on the opposite side of the jacket.
First turn the cable through 180°.
Cut off remnants of the jacket, Kevlar
fibers and foil with scissors.
Installation Instructions for Simplex Connectors
Rotate the cable knife twice.
Then make a second slit up to the end of
the cable starting from the round cut.
Standard cable with the outer jacket
stripped
Page 6
Slit the outer jacket up to the end of the
cable.
Remove the outer jacket, Kevlar fibers
and foil working from the end of the cable
towards the round cut leaving the black
and orange FO cords.