Installation Instructions; Standard Installation - BWT TM CS Mode D'emploi

1.

INSTALLATION INSTRUCTIONS

Installation of the filter assembly below the water level of the pool is highly recommended. In the event that
the filter is installed above the pool water level, a check valve, accessible through a service hatch, must
be installed on the suction line.
• Allow a surface area of 1200 mm x 1200 mm for the installation.
• Position the control panel as close as possible to the multiport valve to facilitate manipulations.
• To prevent vibrations, and any resonance effect, insert a sheet of soft rubber between the base of the
pump and the ground.
1.1

Standard installation

A - B :
Skimmer
C :
Main drain
D :
Vacuum point
E :
Return fitting
F :
Drain
16/48
2021/01 - Indice de révision : I - Code : 26690
VALVE
FILTER
(OPTION)
Ø 500 1''1/2
Ø 610 A 1''1/2
Ø 610 B 2''
Ø 760 2''
Ø 920 2''
D
A B C
A B C
802 503 800 417
840 612 915 418
840 612 930 418
985 762 1083 495
1111 923 1245 557
F
E
CONSTRUCTION & RÉNOVATION
D E
476
477
493
576
638