16
1 Scope of delivery
1.1
Installation set
The bestcare installation set comprises the following components (see Fig. 1):
Filter head (1) with internal thread for mounting the filter cartridge (3), suitable for all filter cartridge
sizes with installation plate. Integrated into the filter head are an Aquastop and a return valve.
Bracket (2) for mounting the bestcare filter cartridge.
bestcare filter cartridge in sizes S (3) with hygiene cap and external thread for screwing
into the filter head (1).
Installation and operating instructions.
In the interest of hygiene, all components are packed in protective film.
1.2
Spare filter cartridge
The spare filter pack contains the spare filter cartridge with hygiene cap (3) packed in
protective film and the installation and operating instructions.
2 Technical data
2.1
Dimensions and weights
bestcare type
Total height without bracket (A)
Total height with bracket (B)
Connection height (C)
Distance from floor (D)
Installation length (E)
Filter cartridges Ø (F)
Weight of filter cartridge, dry (approx.)
Weight of filter cartridge, wet (approx.)
2.2
Operating conditions
bestcare type
Connection thread (intake/outlet)
Nominal flow
Working pressure range
Intake water pressure
Pressure loss at 30 L/h ¹
Pressure loss at 60 L/h ¹
Pressure loss at 180 L/h ¹
Water temperature, min.–max.
Ambient temperature, min.–max.
Ambient temperature during storage/transportation, min.–max.
Operating position
Typical capacity
Filtration
Removal of bacteria, cryptosporidium and giardia
¹
At bypass setting "0", with a 1.5 m hose DN8 fitted to both the intake and outlet.
*
max. 6 months
S
mm
350 - 360
mm
385
mm
306
mm
65
mm
125
mm
88
kg
1.0
kg
1.2
S
3/8"
L/h
200
bar
2 – 8
bar
> 1.2
bar
0.10
bar
0.15
bar
0.60
°C
+ 4 to + 30
°C
+ 4 to + 40
°C
- 20 to + 50
vertikal
L
12.000*
µm
0,02
> 99,9999 %
3 General information
3.1
Explanation of symbols
Warning notices in these installation and operating instructions are identified by symbols.
The notices are introduced by signal words, which indicate the severity of the hazard.
Observe these notices and proceed with care. This will avoid accidents and damage
to property.
I
WARNING!
... indicates a potentially dangerous situation that can cause damage to your health unless
avoided.
I
CAUTION!
... indicates a potentially dangerous situation that can cause damage to property unless
avoided.
Hints and recommendations
INFORMATION!
... highlights useful hints, recommendations and information for efficient and trouble-free
operation.
3.2
About the installation and operating instructions
The installation and operating instructions facilitate the proper installation and use of the filter
system. The information and recommendations stated therein, as well as the local disposal
regulations applicable for the field of use, must be observed. Read through the installation and
operating instructions completely before commencing any work on the filter system.
3.3
Warranty provisions and exclusion of liability
All statements and information in these installation and operating instructions were prepared
whilst taking into account the applicable standards and regulations, state-of-the-art technology
and our many years of expertise and experience.
The filter cartridge is covered by a 2-year warranty.
BWT accepts no liability for damage or consequential damage arising from:
Failure to comply with the information in the installation and operating instructions
Improper use
Incorrect, faulty installation
Improper operation
Unauthorised alterations
Technical modifications
Use of non-approved components
3.4
Responsibility of the operator
The installation and operating instructions must be kept in the immediate vicinity of
the filter system and must be accessible at all times.
The filter system may only be operated when in a faultless and safe condition.
The information in the installation and operating instructions must be closely followed.
3.5
Copyright
Copyright © 2013 BWT water + more GmbH. All rights reserved.
17