Cable Routing Diagram - Yamaha FJR1300AP 2008 Supplément Au Manuel

CABLE ROUTING DIAGRAM

Right grip warmer lead
Right handlebar switch lead
Front brake hose
Guide
Left handlebar switch lead
Left grip warmer lead
Clamp
Throttle cable 1
Throttle cable 2
Route the hazard switch lead, right handlebar switch lead and grip warmer lead under the
handlebar.
Route the hazard switch lead and grip warmer lead over the right handlebar switch lead
while taking care not to have them pinched between the guide and right handlebar switch
lead.
Route the left handlebar switch lead and the grip warmer lead under the handlebar.
Pass the clutch hose, the handlebar switch leads (left and right), the grip warmer leads
(left and right) and the hazard switch lead through the guide.
Clamp the hazard switch lead and right handlebar switch lead. Do not clamp the grip
warmer lead.
Clamp the hazard switch lead, right handlebar switch lead, grip warmer lead, main switch
lead and immobilizer unit lead.
Pass the front brake hose, the right handlebar switch lead, the right grip warmer lead, the
hazard switch lead, the throttle cable1 and 2 through the guide.
Clamp the grip warmer lead on the throttle cable1 and 2. Fasten the clamp where 10 mm
inside of the rubber boot end and cut off the clamp end.
-7-
MAINTENANCE