Extending The Avena 248/248T; Telephoning With Several Call Partners - Swissvoice Avena 248 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Extending the Avena 248/248T

The delivered handset is already registered on to base station. In standby the internal
number of the handset is displayed.
You can register up to 5 handsets to your base station.
If you register your Avena 248/248T handset with a "third party" base station or a "third
party" handset on your Avena 248/248T base station (GAP), you may not be able to
use some functions or only to a limited extent.
Register new handsets
Accessory handsets must be registered to the base station.
Press Menu, select Settings press OK.
Select HS Settings and press OK.
Select Register and press OK.
Select the desired base station. Press OK.
Enter the system PIN (0000 on delivery). Press OK.
Press and hold the paging key on the base station.
If the registration is successful you will hear a confirmation signal.

Telephoning with several call partners

During a call you can make a second internal call (enquiry call), switch between call
partners (brokering) or simultaneously converse (3-way conference call) without the
need for two telephone lines.
Internal conversation / Internal call
Press
Select the desired internal party using the navigation keys and press OK.
If you receive an external call while you are on the phone to an internal call partner,
you will hear an incoming call alert. End the internal call by pressing the End call key.
Press the Talk key. You are connected to the external party.
Avena 248/248T
.
Avena 248/248T
79

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Avena 248t

Table des Matières