Memory full
The recording capacity of your answer machine is 15 minutes (including outgoing
messages).
If the memory is full, Memory full! appears on the handset display and F flashes on
the base station display. No more messages can be recorded. The answer machine
switches to Answer only mode automatically. You must delete old messages.
Remote Access / Setting the remote access PIN code
Remote operation can only be performed after changing the default remote access PIN
code before activating the function. Any 4-digit PIN code is allowed apart from 0000:
Press Menu, select Answer Machine and press OK.
•
Select Answer Settings and press OK.
•
Select Remote Access and press OK.
•
Set ON by using the navigation keys
•
•
Enter the PIN code (0000 on delivery) and press OK.
•
Enter the new PIN code and press OK.
•
Enter the PIN code again and press OK.
Remote activation of the answer machine
•
Dial your number.
•
After 10 rings the TAM automatically answers.
•
Enter your remote access PIN code. If the PIN is correct you will hear a
confirmation tone.
•
If there are new messages, these are played back. Press key 1 to end message
playback.
•
Press key 0 (off=2 short beeps, on=1 short beep).
•
End the call.
Avena 248/248T
†/π
and press OK.
Avena 248/248T
83