Scanning Radio Channels; Dynamic Talkaround Scan; Sending Call Tones; Muting The Radio - Motorola Solutions CLP446e Mode D'emploi

Scanning Radio Channels

Procedure:
1 To navigate to Scan mode, press the Menu button.
If the scan is off, you hear a voice prompt to activate Scan by pressing the+ or - button.
2 To activate scan, press + or - button.
When scan is on, you hear a voice prompt to deactivate Scan by pressing the + or - button.
3 To deactivate scan, press + or - button.

Dynamic Talkaround Scan

This feature maximizes communication coverage for an on-site repeater enabled on two way radio
systems.
Dynamic Talkaround Scan is enabled on a repeater channel through the Customer Programming
Software (CPS). The feature gives the radio the ability to scan the transmit and receive frequencies of
a repeater channel.
NOTICE: The feature is given higher priority than the scan mode. If the Dynamic Talkaround
Scan and Scan are enabled on the home channel, then the radio can only support the Dynamic
Talkaround Scan. This feature is only available in CLPe PLUS model.

Sending Call Tones

Procedure:
1 To navigate to Call Tone, press the Menu button.
2 To transmit a selected call tone, press + or -.
NOTICE:
Six call tones are available.
This feature is enabled through Customer Programming Software (CPS).

Muting the Radio

The Mute Headset Volume setting is configured through Customer Programming Software (CPS).
Procedure:
1 To lower or mute the headset volume, press and hold + or - button.
You hear a "Mute" voice prompt from the radio.
2 To unmute the headset volume, press any buttons.
You hear a "Unmute" voice prompt from the radio.

Escalate Call

Escalate Call feature allows you to switch to Escalate Call Channel and send call tone on the Escalate
Call Channel.
To enable the Escalate Call feature, Escalate Call Channel must be configured in Customer
Programming Software (CPS). Long press menu button activates the Escalate Call feature and
automatically send Escalate Call Tone on Escalate Call Channel. The Escalate Call Hangtime starts
MN006181A01-AA
Getting Started
21