Led Indicators; Volume Led; Monitoring Channels; Scan - Motorola Solutions CLP446e Mode D'emploi

MN006181A01-AA
Getting Started

LED Indicators

Feature
Monitor mode
Call tone

Scan

Turn on or off
Advanced radio configuration
Audio jack feedback

Volume LED

When volume is increased, Smart Status Glow Ring LED lights up in a clockwise direction from the
bottom left to the bottom right of the LED ring.
The followings are the three levels of LED brightness for each LED when volume is increased:
• Dim
• Medium
• Maximum brightness

Monitoring Channels

Procedure:
1 To activate the monitor selection mode, press the Menu button and navigate to Monitor
Selection.
If the monitor is off, you hear a voice prompt to activate the monitor mode by pressing the + or -
button.
2 Press + or - button to activate or deactivate the monitor mode.
When the monitor mode is on, you hear static if no activity is present or audio if channel activity
is present.
3 To engage the monitor mode, enable monitor through the menu and let the menu time out.
4 To exit the Monitor mode, press the PTT button.
Scan
You can scan up to 16 channels on CLP446e and CLPe PLUS models.
When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to
listen and talk to the person transmitting without changing channels.
20
LED Indicator
Solid per channel color.
Momentary solid per channel color.
Cycles through in clockwise direction with one LED lighting
up at one time. LED color changes on the top slot when
each cycle is completed.
Top red and the remaining white LED illuminates briefly.
Blinking green.
LED blinks blue when no accessory at power-up.
LED blinks red and purple fast alternatively when accessory
is unplugged.