Symptom And Solutions - Motorola Solutions CLP446e Mode D'emploi

Troubleshooting
The following table explains the ways to troubleshoot if the symptom occurred.

Symptom and Solutions

Procedure:
1
If...
No power
Hearing other noises or conversation on
a channel
Message Scrambled
Audio quality not good enough
Limited talk range
Then...
Recharge or replace the Li-Ion battery.
NOTICE: Extreme operating tem-
peratures may affect battery life.
See Battery Specifications on page
Frequency or Interference Eliminator
Code may be in use.
Perform one of the following actions:
• Confirm Interference Eliminator Code
is set.
• Change frequencies or codes settings on
all radios.
• Ensure the radio is at the right frequency
and code when transmitting.
Scramble Code might be on or the setting
does not match other radio settings.
Change the settings through Customer Pro-
gramming Software (CPS).
Radio settings might not be match correctly.
Check the frequencies, codes, and band-
widths to ensure the settings are the same
in all radios.
Perform one of the following actions:
• Check for clear line of sight to improve
transmission. Avoid being near steel,
concrete structures, heavy foliage, build-
ings, or vehicles.
• Change the placement of the radio.
• To increase range and coverage, you
can reduce obstructions or increase pow-
er. UHF radios provides greater cover-
age in industrial and commercial build-
ings. Increasing power provides greater
MN006181A01-AA
Troubleshooting
23.
37