Motorola Solutions CLP446e Mode D'emploi page 14

MN006181A01-AA
Getting Started
Figure 3: Connecting Wired Audio Accessory
3 Turn the radio on.
4 Press either the Battery Status, Menu, or Volume Control button to check for audio through
the audio accessory.
Table 1: Top LED Configuration if Wired Audio Accessory is not Connected or Removed
User Mode
Turn on radio without an au-
dio accessory plugged in.
Audio accessory removed
while radio is on.
NOTICE:
Lower the radio volume before placing the audio accessory in or near your ear.
The CLPe Series radios offer various audio accessories. For detailed audio accessories
list, refer to
accessories.
14
LED Status
Solid Blue
Red/purple blinks until an
audio accessory is plugged
in
http://www.motorolasolutions.com/CLPe
Color
for information on approved