Pump Front Control Panel - DAB AQUATWIN TOP 132 Instructions Pour L'installation Et La Maintenance

Indication of P2 operation in "MAIN WATER" mode; in this mode pump two takes the water from the mains water
tank.In this mode the messages blink to highlight the consumption of drinking water.

11. PUMP FRONT CONTROL PANEL

Ref. Function
1
White warning light indicating correct operation of the auxiliary circuits.
2 Red warning light indicating a general alarm.
3
Alarm RESET button.
Electropump P1
4 Green warning light: fixed light indicating pump running.
Green warning light: blinking light indicating pump not available.
5 Yellow warning light indicating pump P1 malfunction alarm
6 Button for manual control or deactivation of pump P1:
- if held down for more than 3 seconds, allows the pump to be switched on manually,
- if pressed quickly, allows deactivation of the respective pump or activation of automatic operation.
Electropump P2
7 Green warning light: fixed light indicating pump running.
Green warning light: blinking light indicating pump not available.
8 Yellow warning light indicating pump P2 malfunction alarm
9 Button for manual control or deactivation of pump P2:
- if held down for more than 3 seconds, allows the pump to be switched on manually,
- if pressed quickly, allows deactivation of the respective pump or activation of automatic operation.
ENGLISH
Fig. 4: Front label
46