Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Engine oil
b. The dipstick
has a minimum
and a max-
1.
Oil level measurement
imum
mark, and the oil level should be
a. To check the level, warm the engine up
between
the two.
If the level is lower,
for
several minutes,
screw
the dipstick
then add sufficient
oil to raise it to the
completely
out
and then
just rest the
proper level.
stick in the hole.
2.
Engine oil replacement
a. Start the engine. After a few minutes of
NOTE:
warm-up stopthe engine.
When
checking
engine
oil
level
with
the
b. Place a container
under the engine.
dipstick,
let the unscrewed
dipstick
just rest
c. Remove the dipstick
and drain plug.
on the case threads. Also, be sure the machine
is level.
1. Drain plug
1, Dipstick
2. Maximum
level
3. Minimum
level
8-5

Publicité

Chapitres

Table des Matières
loading

Table des Matières